Mpls Tp Bfd

ITU-T SG15 MPLS-TP draft Recommendations and the corresponding IETF drafts

Oct 17, 2011 . Ixia was able to test the following MPLS-TP functions: -- Single Hop BFD LSP --

DUT role selection (Ingress, Egress, or Transit); Y.1731 or BFD extensions to

G-Ach) to reuse traditional MPLS and Carrier Ethernet OAM procedures such as

Ixia was able to test the following MPLS-TP functions: Single Hop BFD LSP;

May 11, 2010 . Internet-Draft draft-asm-mpls-tp-bfd-cc-cv-04 May 2010 groups. Note that other

Jul 3, 2010 . BFD can be used to track the liveliness and detect data plane failures of MPLS-

Sep 19, 2011 . pseudowires (PWs), MPLS-TP OAM including BFD connectivity check (CC) and

BFD can be used to track the liveliness and detect data plane failures of MPLS-

MPLS-TP OAM Options: GACH+Y.1731 vs. BFD Extension/LSP Ping. � MPLS-TP

Oct 26, 2009 . Versions: 00 01 02 03 04 draft-ietf-mpls-tp-bfd-cc-cv. MPLS Working Group A.

Jun 24, 2011 . Draf-bfd for mpls-tp cc/cv/rdi is not consensus in ietf mpls group, you can see

Mar 3, 2010 . Internet-Draft draft-asm-mpls-tp-bfd-cc-cv-02 March 2010 Internet-Drafts are draft

Ethernet service delivery over static pseudowires (PWs), MPLS-TP. OAM

It is published in now to make ideas, motivations and approaches available.

MPLS-Transport Profile provides the same QoS, protection and restoration, and

Nov 22, 2011 . The channel type in ACH header identifies the BFD payload as BFD CC or CV packet

There are a variety OAM tools used in IP, MPLS, MPLS-TP, pseudowires, and

Jul 6, 2011 . Centec Introduces Industry Leading Hardware-based MPLS-TP OAM .

The strategy proved useful: Four vendors brought new BFD-based pre-standard

May 12, 2011 . Proactive Connection Verification, Continuity Check, and Remote Defect

Oct 26, 2011 . To monitor MPLS/MPLS-TP paths like tunnels or Pseudowires, there is a

Jul 7, 2011 . Provides complete MPLS-TP OAM functionalities for equipments from edge .

IETF MPLS-TP Continuity Checks (CC) Bidirectional Forwarding Detection (BFD).

measurement). Note that the existing MPLS tools such as Bidirectional

Query on "draft-asm-mpls-tp-bfd-cc-cv-02". Hello draft authors, Please clarify

We have designed, implemented, and tested a system for configuring, running

MPLS-TP CC, Proactive CV, and RDI Mechanism Using BFD . . . ..5 3.1.

draft-ietf-mpls-tp-bfd-cc-cv-00.txt without any changes but the file name and

Oct 28, 2010 . The main interest is now MPLS-TP, but there are still open issues . and BFD

BFD can be used to track the liveliness and detect data plane failures of MPLS-

RFC 4379 [RFC4379] and BFD-MPLS [BFD-MPLS] define alert mechanisms that

Query on "draft-asm-mpls-tp-bfd-cc-cv-02". Hello draft authors, Please clarify on

To create a Bidirectional Forwarding Detection (BFD) template and to enter BFD

RSVP-TE extensions for MPLS-TP OAM Configuration . BFD is the Choosen

Many industry initiatives and views on MPLS and MPLS-TP. . path protection 

Jul 15, 2011 . MPLS-TP cannot be configured without IP addresses. � MPLS-TP is supported

Supports MPLS-TP Fault Management - Alarms supported in both Y.1731 format

A similar mechanism cannot be used in MPLS-TP OAM because of the . packets

LSP endpoint can signal a locally detected defect to the remote endpoint. For

This document also clarifies the use of BFD for MPLS LSPs using ACH

Nov 22, 2011 . The channel type in ACH header identifies the BFD payload as BFD CC or CV packet

MPLS-TP CC, proactive CV and RDI Mechanism using BFD. . . ..5 3.1. Existing

The MPLS-TP BFD solution that is still under development will support a subset

In June 2010, the BFD protocol standardization process is the RFC stage. RFC

Mar 30, 2011 . Draft MPLS-TP CC CV RDI, BFD for MPLS-TP. FYI, a "comments welcome"

Oct 26, 2011 . https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=6500 Summary:

Test the TDM-like OAM capabilities of your MPLS-TP domain by using a number

Sitemap

MPLS TP BFD